www 101

All you need to know about the internet

Have a Question?

If you have any question you can ask below or enter what you are looking for!

How to Create a Set of Spirit Day Icons in Adobe Illustrator

Final product image
What You’ll Be Creating

Get ready for Spirit Day! Today’s the day when millions of people go
purple to show their support for LGBTQ youth against bullying. We’re proud to
stand together with GLAAD and celebrate this day by wearing purple and creating
this set of flat purple icons, representing strength, courage, love and
support! Follow this article and learn how to use simple shapes, warp effects and various functions of the Pathfinder panel to design these icons dedicated to Spirit Day. 

As the world goes purple, showing support
and assistance, be sure to check out Envato Market for more purple icons
that may inspire you! Let’s start!

1. How to Create a Banner Icon

Step 1

Take the Rectangle Tool (M), hold Shift
and make a 65 x 65 px rectangle. Fill it with bright purple color.

make a square

Step 2

Copy
(Control-C)
the square and Paste in Back (Control-B).

Move the bottom copy down and to the right,
using the arrow keys on your
keyboard while holding Shift. Fill
it with linear gradient of darker-purple tints. Use the Gradient Tool (G) to place the gradient horizontally from left to
right.

Keeping the shape selected, go to Object > Path > Add Anchor Points
to add an anchor point in the middle of each edge.

Copy Control-C the square and Paste in Back Control-B

Step 3

Take the Direct Selection Tool (A) and drag the anchor point on the
right edge to the left.

drag the anchor point on the right edge to the left

Step 4

Create a narrow rectangle filled with
dark-purple linear gradient and place it between the two squares, making it fit
the space. The Smart Guides (View >
Smart Guides)
will help you to position the rectangle, making it stick to
the right place.

Use the Delete Anchor Point Tool (-) to remove the bottom right anchor
point, turning the shape into a triangle to form the folding of the flag.

Use the Rectangle Tool (M) to make a narrow 5 x 110 px rectangle for the flagpole. Fill it with light-purple
linear gradient.

Take the Ellipse Tool (L) and create a 12 x 12
px
circle on top of the flagpole.

add elements for the flag

Step 5

Let’s add a heart symbol to our flag. Make
a 25 x 25 px circle of light-purple
color. Hold Alt-Shift and drag the
shape to the right, creating an overlapping copy.

Unite the copies in the Pathfinder
and use the Delete Anchor Points Tool
(-)
to remove the middle anchor point in the bottom, making the bottom edge
flat.

make a heart symbol 1

Step 6

Use the Add Anchor Point Tool (+) to place a new point in the middle of the
bottom edge and then remove two points at both sides of it (marked in the screenshot below). Now that our object
is beginning to take the form of a heart, let’s further modify it.

Use the Direct Selection Tool (A) to drag the bottom anchor point down.
Then drag the bottom handles of the side anchor points down to make the shape
more rounded.

The Guide
will help to make the length of the handles equal. Turn on the Rulers (Control-R) and drag the horizontal
guideline from the upper Ruler. You can then select and delete it or View > Guides > Clear Guides when you don’t need it anymore.

make a heart symbol 2

Step 7

Position the heart over the center of the
flag.

Position the heart over the center of the flag

Step 8

Now let’s create a bright icon base. Take the Polygon Tool and single-click anywhere on the Artboard to open a pop-up Polygon window. Set the number of Sides to 3 and create a 25 x 100 px triangle. You can adjust the
size of the shape either from the control panel on top or from the Transform panel (Window > Transform).

Double-click the Reflect Tool (O),
select the Horizontal Axis and click
Copy to create an upside-down
triangle. Move the copy down, making the tips of the triangle stick to each other.

make triangles with Polygon tool

Step 9

Group
(Control-G)
both triangles and double-click the Rotate Tool
(R)
and set the Angle value to 30 degrees. Click Copy to create a rotated group of triangles and press Control-D multiple times to create more
copies, making a circle of rays.

Use the Rotate Tool to create rotated copies

Step 10

Use the Rounded Rectangle Tool to make a 140 x 140 px yellow rectangle for the icon base. Adjust the Corner Radius, using the Transform panel, setting it to about 33 px.

Place the circle of rays between the flag and
the icon base.

make a rounded rectangle for the base

Step 11

Copy
(Control-C)
the icon’s base and Paste in Front (Control-F). 

Bring
the shape to Front (Shift-Control-]).
Finally, select all the objects, right
mouse click
and Make Clipping Mask.

Make Clipping Mask

And that’s how our icon looks now! Everything
is hidden inside the Clipping Mask
and still editable if you double-click
it.

love banner icon is finished

2. How to Create a Megaphone Icon

Step 1

Use the Rounded Rectangle Tool to make a 10 x 33 px shape with fully rounded corners. 

Switch to the Rectangle Tool (M) and make an 83 x 65 px shape, filled with dark-purple
linear gradient.

Attach one shape to another and let’s Align them. Select both shapes and
click the large rectangle once more to make it a Key Object (you will see a thicker selection). Head to the Align panel and click Vertical Align Center.

create rectangles and align them

Step 2

Select the bottom left anchor point of the
larger rectangle with the Direct
Selection Tool (A)
and hit Enter to
open the Move window. Set the Vertical value to -20 px and the Horizontal
to 0 px. Click OK to move the point 20 px
up. 

Repeat the same for the upper left anchor point, moving it in the opposite
direction, thus making the left side of the shape narrow.

Move the anchor points

Step 3

Let’s add a lightning bolt emblem to our
loudspeaker. Make a 10 x 45 px
rectangle and use the Line Segment Tool
()
to add two horizontal lines across the rectangle. Select all three
elements and Divide them in the Pathfinder panel.

Now that our rectangle is split into three
parts, let’s use the Move function
to move the middle section 5 px to
the right and the bottom section 10 px
to the right, making them look like stairs.

make a lightning bolt emblem 1

Step 4

Move the bottom and middle pieces up a bit
to make all three elements overlap (use either the Up Arrow key or the Move
function).

Double-click the Shear Tool and set
the Shear Angle to 25 degrees, making our object skewed a
bit. 

Unite all the pieces in the Pathfinder,
merging them into a single shape.

make a lightning bolt emblem 2

Step 5

Arm yourself with the Delete Anchor Point Tool (-) and remove the bottom right anchor
point to make the tip of the lightning bolt sharp and pointed.

We can also make our shape more refined and dynamic by moving some of the points closer to each other. You can see these
points marked in the screenshot below.

make a lightning bolt emblem 3

Step 6

Rotate the lightning bolt and position it
over the megaphone to make the shapes fit each other.

Add one more detail to our loudspeaker by
creating a 25 x 25 px circle on the
right side of the loudspeaker. Apply a dark-purple linear gradient and Send the circle to Back (Shift-Control-[), beneath the loudspeaker.

Rotate the lightning bolt and position it over the megaphone

Step 7

Let’s make the handle of the loudspeaker.
Start by making a 35 x 25 px
rectangle. Duplicate (Control-C > Control-F)
it and shrink the top copy down to 23 x 15
px
.

make a handle of the loudspeaker

Step 8

Select both shapes and apply the Minus Front function of the Pathfinder to cut out the shape.

Switch to the Direct Selection Tool (A) and use the Live Corners feature to make the corners rounded by pulling the
circle markers to the center. You can adjust the Corner Radius from the control panel on top, setting it to 3 px.

apply Minus Front function of the Pathfinder

Step 9

Attach the handle to the loudspeaker and
use the icon base from our first icon to give it a finished look.

And there we have it—our second icon is
ready! Let’s move on!

Attach the handle to the loudspeaker

3. How to Create a Ribbon Icon

Step 1

Grab the Rectangle Tool (M) and make a 55 x 20
px
rectangle with dark-purple linear fill. Go to Effect > Warp > Arch and move the Horizontal Bend slider to 60%,
setting the Vertical Distortion to 10%.

Go to Object
> Expand Appearance
to apply the effect. 

make a rectangle with dark-purple linear fill

Step 2

Make an 115 x 20 px rectangle of a flat light-purple color. Apply Effect > Warp > Arch with -40% Horizontal Bend value. Set the Horizontal Distortion to 15%, making the shape a bit wider from
the right side.

Finally, Object > Expand Appearance to apply the effect.

make an arched shape

Step 3

Rotate the light-purple part of the ribbon
and attach it to the right side of the arched element. Select its top right
anchor point with the Direct Selection
Tool (A)
and pull the circle marker to make the corner fully rounded.

attach a ribbon

Step 4

Use the Reflect Tool (O) to create a mirrored copy, placing it on the
opposite side of the ribbon. Send
the copy Backward (Control-[) and fill
it with linear gradient, making it darker in the center in order to create the illusion of a shadow from the top ribbon.

Use the Reflect Tool O to create a mirrored copy

Step 5

Place the ribbon on a bright yellow
icon-base—and there we have it! Let’s move on to our last icon.

Place the ribbon on a bright yellow icon-base

4. How to Create a Clenched Fist Icon

Step 1

Let’s depict a clenched fist, starting from
the fingers. Use the Rounded Rectangle
Tool
to create the four fingers, varying the height of the shapes, as shown
below. Keep the Corner Radius of
each shape at 6 px and fill the
shapes with a gentle linear gradient, slightly darker at the bottom.

depict a clenched fist starting from the fingers

Step 2

Now we’ll make a palm from a 70 x 60 px rectangle. Move its top anchor
points closer to each other, making them stick to the edges of the fingers.

make a palm from a rectangle 1

Step 3

Let’s make the rectangle look more like a
real palm. Use the Add Anchor Point Tool
(+)
to create two points at the bottom edge of the shape. Then select the
top left and top right anchor points and drag them up.

make a palm from a rectangle 2

Step 4

Continue working with those anchor points
that we’ve dragged up and use the Live
Corners
to make the edges of the palm smooth and rounded.

make a palm from a rectangle 3

Step 5

Copy one of the fingers that we’ve created
and place it over the rest of the fingers, forming a thumb. Use the Transform
panel to make the bottom left corner of the shape square by setting its Corner Radius to 0 px.

Duplicate the shape once again and rotate
the shape, combining the parts of the thumb.

make a thumb

Step 6

Use the Ellipse Tool (L) to create a light-purple ellipse, making it
overlap the palm, as shown below.

Select both the ellipse and the palm. Take
the Shape Builder Tool (Shift-M),
hold Alt and click that piece of the
ellipse outside the palm we want to delete. Done! Now it fits the palm perfectly.

add ellipse to the palm

Step 7

Use the Rectangle Tool (M) to make a 37 x 55
px
rectangle for the forearm. Move the top anchor points, making them stick to the bottom edge of the palm.

Adjust the color, making the top of the
forearm blend nicely with the light-purple part of the palm.

make a rectangle for the forearm

Step 8

Use the same yellow base from our previous
icons to finish up the fist icon.

 finish up the fist icon

Step 9

Now we can place the icons on a dark-purple
background and create subtle shadows. To do so, Copy the flat yellow elements and Paste them in Back
(Control-C > Control-B).
Move the copies down and to the right and change their color to dark purple.

place the icons on dark background and add shadows

Our Spirit Day Icons Are Ready!

This is all for this tutorial! We can continue adding details and turn our set of icons into a fancy poster by
adding text to it to make the composition look more balanced and complete.

I hope you’ve enjoyed following this
tutorial and will give your support by wearing something purple. Be sure to check our more Spirit Day tutorials on Envato Tuts+

Have fun!

Spirit Day Icons