www 101

All you need to know about the internet

Have a Question?

If you have any question you can ask below or enter what you are looking for!

Creating a Realistic Teddy Bear in Maya—Part 2

Final product image
What You’ll Be Creating

1. Modeling Mouth and Nose

Step 1

Start Maya.
Open the teddy bear file which was saved in the last part of the tutorial.

Start Maya
Start Maya

Step 2

In the front
view, select the poly cone primitive in the shelf menu and draw it around the nose
area as shown in the following image.

poly cone primitive
poly cone primitive

Step 3

Set the values of Subdivisions Axis to
12
and Subdivisions Height to
4
.

Subdivisions
Subdivisions

Step 4

Being in the
face selection mode, select the right half faces of the cone and delete them.

face selection mode
face selection mode

Step 5

Jump in the edge
selection mode and select each alternate edge and delete all.

edge selection mode
edge selection mode

Step 6

With the half mesh
selected, go to Edit > Duplicate Special and click on its option
box. In the Duplicate Special Options
window, turn on Instance radio
button and set the Scale X value to -1.000. Click on Duplicate Special button.

Edit  Duplicate Special
Edit > Duplicate Special

Step 7

To adjust
the shape of the mouth, jump in the side view. 

side view
side view

Step 8

Being in the
vertex selection mode, edit and arrange the vertices of the nose mesh according
to the reference image.

vertex selection mode
vertex selection mode

Step 9

Jump in the
front view and arrange the vertices according to the front reference image.

front view
front view

Step 10

To add more
details, insert three edge loops as shown in the following image.

insert three edge loops
insert three edge loops

Step 11

Adjust the
vertices according to the side reference image.

Adjust the vertices
Adjust the vertices

Step 12

In this way,
the mouth of the teddy bear is completed.

mouth of the teddy bear

Step 13

I have
created one more poly cone shape and put it on the nose tip.

poly cone shape
poly cone shape

2. Ear Modeling

Step 1

To start
creating the ear of the teddy bear, create a polygon cube shape mesh in the
front view. Set the values of Subdivisions
width
to 2, Subdivisions
Height
to 1 and Subdivisions depth to 4.

Subdivisions
Subdivisions 

Step 2

Arrange the
vertices of the ear model according to the reference image.

Arrange the vertices
Arrange the vertices 

Step 3

To add more
details to the ear mesh, jump in the perspective view and adjust the vertices
of the ear mesh as shown in the following image.

Jump in the perspective view
Jump in the perspective view

Step 4

For mirroring
the right side ear, select the left side ear mesh and then press Ctrl-G key. Go to Edit > Duplicate
Special
Options box and follow the instructions as depicted in the
following image. 

Ctrl-G key
Ctrl-G key

3. Eyes Modeling

Step 1

To begin with eye
modeling, jump in the front view and create a sphere around the eye area as shown
in the following image.  

create a sphere
create a sphere

Step 2

Make a
duplicate copy of the eye ball for the opposite side. 

Make a duplicate copy of the eye ball
Make a duplicate copy of the eye ball

Step 3

In this way,
the base body model is completed. Now it’s time to unwrap and texture the
model.

the base body model is completed
the base body model is completed

4. Unwrapping Body Mesh

Step 1

First of
all, you need to unfold and flatten the body mesh UVs for applying the proper
and un-stretched texture map for fur placement. With the body mesh selected, go
to Edit UVs > UV Texture Editor command to open the UV
Texture Editor
window.

UV Texture Editor
UV Texture Editor

Step 2

In the UV Texture
Editor
window, you can see the UVs are in a zigzag shape.

UV Texture Editor
UV Texture Editor

5. Creating Shells

Step 1

With the both leg
edge loops selected, go to Edit UVs >
Cut UV Edges command to divide UVs
shell.

Edit UVs  Cut UV Edges
Edit UVs > Cut UV Edges

Step 2

You can see
the created shells for applying planar projection mapping. Click on Display of Border Texture button in the
UV Texture Editor window.

Display of Border Texture
Display of Border Texture 

Step 3

After clicking on Display of Border Texture button, you
can see slightly thicker border edges as shown in the following image.

Display of Border Texture
Display of Border Texture 

Step 4

With the
nose mesh selected, go to Show menu
in panel menu bar and turn on View
Selected
option to isolate the selected mesh. 

View Selected
View Selected

Step 5

With the
center edge loop selected, go to Edit
UVs >
Cut UV Edges command.

Edit UVs  Cut UV Edges
Edit UVs > Cut UV Edges

Step 6

In this way,
this has been divided in two parts for left and light projection. 

left and light projection
left and light projection

6. Applying Planar Maps

Step 1

For applying
planar projection map, select any of the faces of the torso and then go to Select > Select Shell command.

Select  Select Shell
Select > Select Shell 

Step 2

The Select Shell command selects all shells of the torso.

Select Shell command
Select Shell command

Step 3

With the
torso shells selected, go to Create UVs >
Planar Mapping option box.

Create UVs  Planar Mapping
Create UVs > Planar Mapping 

Step 4

In the Planar Mapping Options window, turn on Fit
projection to
Best plane radio
button and then click on Apply
button to apply planar map command.

Planar Mapping Options
Planar Mapping Options 

Step 5

After using Planar Mapping command, move and rotate
the UVs shape inside the UV Texture Editor window as shown in the
following image.

UV Texture Editor
UV Texture Editor 

Step 6

With the unwrapped
UVs shell selected, move it outside of the layout area.

layout area
layout area

Step 7

For applying planar
projection map to the back side of the torso, select any of the back faces and
then go to Select > Select Shell command.

Select  Select Shell
Select > Select Shell

Step 8

In this way, the front
and back sides UVs are unwrapped as shown in the following image.

Unwrapped faces
Unwrapped faces

Step 9

For
unfolding and relaxing UVs properly, make a right click on UVs inside the UV
Texture Editor
and select UV component as shown in the following image.

UV Texture Editor
UV Texture Editor

Step 10

With one UV shell selected, go to Tool menu in UV
Texture Editor
and then select Smooth
UV Tool
.

Smooth UV Tool
Smooth UV Tool

Step 11

Click on Unfold
and Relax boxes as shown in the following image. 

Unfold and Relax
Unfold and Relax

Step 12

With the
same UV shell selected, go to Polygon
menu inside UV Texture Editor and then
click on Relax option box to open Relax
UVs Options
setting window. 

In the Relax UVs Options setting window,
turn on Pin UV border and set the Maximum Iterations value as 1. Click on Apply button.

Maximum Iterations
Maximum Iterations

Step 13

In this way,
the torso UV shapes are unfolded and relaxed.

UV shapes are unfolded and relaxed
UV shapes are unfolded and relaxed

Step 14

Following
the same procedure, select the leg face shell and apply planar map. 

apply planar map
apply planar map

Step 15

After
applying the planar map on both legs, the upper and bottom shells look like
this.

upper and bottom shells
upper and bottom shells

Step 16

Use Smooth
UV
tool and Relax command on legs UVs as shown in the following image.

Smooth UV tool and Relax command

Step 17

Finally,
arrange the UV layout of all body parts as shown in the following image.

arrange the UV layout
arrange the UV layout

7. Unwrapping Mouth

Step 1

Apply planar
map on half selected shell of mouth mesh and arrange the UVs.

Apply planar map
Apply planar map

Step 2

In this way,
the complete UVs of nose mesh unwrapped and relaxed in the UV Texture Editor
as shown in the following image.

UV Texture Editor
UV Texture Editor

8. Unwrapping Ears and Nose 

Step 1

Following
the previous techniques, unwrap the ear mesh UVs also.

Unwrap the ear mesh
Unwrap the ear mesh

Step 2

Unwrap the
nose tip mesh UVs as shown in the following image.

Unwrap the nose tip
Unwrap the nose tip

Step 3

In this way, all body
parts of the teddy bear mesh have been unwrapped properly. 

All parts unwrapped
All parts unwrapped